張宗偉

基本資料表

姓名

張宗偉

聯絡電話

07-3814526 #16759

twchang@nkust.edu.tw

教師

類別

專任師資

職稱

助理教授

學歷

國立成功大學電機工程學系博士

逢甲大學電子工程研究所碩士

研究專長

車用電機元件積層製造設計、磁性元件設計、磁性材料分析

更多資料

論文名稱
(SCI論文) 1. M.-C. Tsai, P.-W. Huang, W.-H. Yang, and T.-W. Chang, "Offset overlap type of modulated ferromagnetic pole piece ring and method thereof," US Patent App. 18/631,126, 2025. (SCI) 2. P.-W. Huang, T.-W. Chang, H.-H. Huang, P.-H. Liao, I.-H. Jiang, and M.-C. Tsai, “Investigation of Axial–Radial Bevel Magnetic Gear Based on Magnetic 3D Printing,” International Journal of Precision Engineering and Manufacturing, pp. 1–7, 2025.(SCI) 3. L. K. Chang, T. W. Chang, J. C. Huang, D. Q. Liu, M. C. Tsai, and M. H. Horng, “Additive Manufacturing Section Image Features for Magnetic Processing Characteristics Prediction,” Key Engineering Materials, vol. 1016, pp. 99–104, 2025.(SCI) 4. L.-K. Chang, P.-C. Chen, M.-C. Tsai, R.-M. Lee, J.-C. Huang, T.-W. Chang, and M.-H. Horng, “Enhancing prediction of magnetic properties in additive manufacturing products through a 3D convolutional vision transformer model,” The International Journal of Advanced Manufacturing Technology, pp. 1–17, 2025.(SCI) 5. C.-W. Lu, F.-Y. Hung, T.-W. Chang, and H.-Y. Hsieh, “Study and Application on the Electromagnetic Stainless Steel: Microstructure, Tensile Mechanical Behavior, and Magnetic Properties,” Materials, vol. 17, no. 12, p. 2998, 2024.(SCI) 6. P.-H. Liao, M.-C. Tsai, H.-C. Lu, P.-W. Huang, and T.-W. Chang, “Cycloidal Magnetic Gear Utilizing Magnetic Repulsion Characteristics,” IEEE Transactions on Magnetics, 2024.(SCI) 7. T.-W. Chang, P.-W. Huang, H.-H. Yu, C.-C. Huang, C.-C. Mo, and M.-C. Tsai, “Additive Manufacturing for Skew Magnetization Fixture of Annular Magnet,” International Journal of Precision Engineering and Manufacturing, pp. 1–9, 2024.(SCI) 8. T.-W. Chang, P.-W. Huang, H.-H. Yeh, C.-H. Shih, and M.-C. Tsai, “Additive Manufacturing Lightweight Inductor,” pp. 1745–1748.(SCI) 9. T.-W. Chang, P.-W. Huang, C.-H. Shih, A. Hung, C.-C. Wang, H.-F. Ko, and M.-C. Tsai, “Additive manufacturing high current power inductor,” IEEE Transactions on Magnetics, 2024.(SCI) 10. L.-K. Chang, K. Jiang, C. Chung, T.-W. Chang, and M.-C. Tsai, “Integrating machine learning and multi-objective optimization to investigate the magnetic and mechanical properties of FeSiCr soft magnetic composite processed by selective laser melting,” The International Journal of Advanced Manufacturing Technology, vol. 132, no. 7, pp. 3637–3653, 2024.(SCI) 11. L.-K. Chang, R.-S. Chen, M.-C. Tsai, R.-M. Lee, C.-C. Lin, J.-C. Huang, T.-W. Chang, and M.-H. Horng, “Machine learning applied to property prediction of metal additive manufacturing products with textural features extraction,” The International Journal of Advanced Manufacturing Technology, vol. 132, no. 1, pp. 83–98, 2024.(SCI) 12. C.-C. Mo, C.-C. Kuan, Y.-H. Wang, Y.-S. Lu, T.-W. Chang, W.-Y. Liao, T.-H. Fang, M.-C. Tsai, and C.-C. Huang, “Effect of NdCoGa alloy addition to waste wind turbine magnets to enhance the characteristics of recycled sintered NdFeB permanent magnets,” Journal of Magnetism and Magnetic Materials, vol. 578, pp. 170808, 2023.(SCI) 13. T.-Y. Huang, C.-W. Cheng, A.-C. Lee, T.-W. Chang, and M.-C. Tsai, “Influence of wobble-based scanning strategy on surface morphology of laser powder bed-fabricated permalloy,” Materials, vol. 16, no. 5, pp. 2062, 2023.(SCI) 14. P.-W. Huang, T.-W. Chang, W.-H. Yang, Y.-C. Wu, and M.-C. Tsai, “A Novel S-Shape Offset Type of a Modulated Ferromagnetic Pole Piece Design for a Pseudo-Direct Drive Motor,” IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1–5, 2023.(SCI) 15. T.-W. Chang, P.-W. Huang, W.-C. Huang, C.-C. Mo, and M.-C. Tsai, “Additive manufacturing high fault-tolerant axial flux variable reluctance resolver,” IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1–5, 2023.(SCI) 16. K.-S. Yu, C.-W. Cheng, A.-C. Lee, W.-Y. J. Jian, W.-C. Chang, T.-W. Chang, and M.-C. Tsai, “Additive manufacturing of NdFeB magnets by synchronized three-beam laser powder bed fusion,” Optics & Laser Technology, vol. 146, pp. 107604, 2022.(SCI) 17. W.-Y. J. Jian, C.-W. Cheng, W.-C. Chang, T.-Y. Huang, Y.-C. Liang, A.-C. Lee, T.-W. Chang, and M.-C. Tsai, “Fabrication of crack-free Nd-Fe-B magnets with laser powder bed fusion,” Materialia, vol. 21, pp. 101351, 2022.(SCI) 18. H.-Y. Chen, C.-C. Lin, M.-H. Horng, L.-K. Chang, J.-H. Hsu, T.-W. Chang, J.-C. Hung, R.-M. Lee, and M.-C. Tsai, “Deep learning applied to defect detection in powder spreading process of magnetic material additive manufacturing,” Materials, vol. 15, no. 16, pp. 5662, 2022.(SCI) 19. T.-W. Chang, P.-W. Huang, S.-H. Kung, C.-H. Shih, M.-C. Tsai, C. U. Ubadigha, W.-C. Chang, and C.-C. Huang, “Fabrication of non-contact magnetic screws by additive manufacturing,” IEEE Transactions on Magnetics, vol. 58, no. 8, pp. 1–5, 2022.(SCI) 20.T.-W. Chang, K.-W. Liao, C.-C. Lin, M.-C. Tsai, and C.-W. Cheng, “Predicting magnetic characteristics of additive manufactured soft magnetic composites by machine learning,” The International Journal of Advanced Manufacturing Technology, vol. 114, pp. 31777–3184, 2021.(SCI) 21. S.-T. Wu, P.-W. Huang, T.-W. Chang, I.-H. Jiang, and M.-C. Tsai, “Application of magnetic metal 3-D printing on the integration of axial-flow impeller fan motor design,” IEEE Transactions on Magnetics, vol. 57, no. 2, pp. 1–5, 2020.(SCI) 22. K.-J. Jhong, T.-W. Chang, W.-H. Lee, M.-C. Tsai, and I.-H. Jiang, “Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting,” AIP Advances, vol. 9, no. 3, pp. 035317, 2019.(SCI) 23. W.-H. Lee, T.-W. Chang, and Y.-H. Su, “Effects of Annealing Pressure on Microstructure and Conversion Efficiency for Electrodeposited CuInSe₂ Absorbers,” Journal of Nanoscience and Nanotechnology, vol. 17, no. 1, pp. 773–779, 2017.(SCI) 24. C.-S. Chiang, W. Lee, T. Chang, and Y. Su, “Improving conversion efficiency of co-electrodeposited CuInSe₂ thin film solar cells with substrate and solution heating,” Journal of Applied Electrochemistry, vol. 45, pp. 549–556, 2015.(SCI) 25. T.-W. Chang, C.-T. Liu, W.-H. Lee, and Y.-J. Hsiao, “A Study of Back Electrode Stacked With Low Cost Reflective Layers For High-Efficiency Thin-Film Silicon Solar Cell,” Journal of Solar Energy Engineering, vol. 136, no. 3, pp. 031002, 2014.(SCI) 26. T.-W. Chang, W.-H. Lee, Y.-H. Su, and Y.-J. Hsiao, “Effects of photo-assisted electrodeposited on CuInSe₂ thin films,” Nanoscale Research Letters, vol. 9, pp. 1–5, 2014.(SCI) 27. T.-W. Chang, S.-Y. Hu, and W.-H. Lee, “Synthesis of CuInSe₂ thin films from electrodeposited Cu11In9 precursors by two-step annealing,” Journal of Electrochemical Science and Engineering, vol. 4, no. 1, pp. 27–35, 2014.(SCI) 28.T. Chang, Y. Su, and W. Lee, “Improvement on conversion efficiency of CIGS thin film solar cell using electrochemical depleting,” Journal of The Electrochemical Society, vol. 161, no. 12, pp. E167, 2014.(SCI) 29. Y.-H. Su, T.-W. Chang, W.-H. Lee, and B.-H. Tseng, “Characterization of CuInSe₂ thin films grown by photo-assisted electrodeposition,” Thin Solid Films, vol. 535, pp. 343–347, 2013.(SCI) 30. T.-W. Chang, W.-H. Lee, and Y.-H. Su, “Effects of Annealing Pressure for Electrodeposited CuInSe₂ Solar Cell,” ECS Transactions, vol. 50, no. 51, pp. 25, 2013.(SCI)

論文名稱

(SCI論文)

1. M.-C. Tsai, P.-W. Huang, W.-H. Yang, and T.-W. Chang, "Offset overlap type of modulated ferromagnetic pole piece ring and method thereof," US Patent App. 18/631,126, 2025. (SCI)

2. P.-W. Huang, T.-W. Chang, H.-H. Huang, P.-H. Liao, I.-H. Jiang, and M.-C. Tsai, “Investigation of Axial–Radial Bevel Magnetic Gear Based on Magnetic 3D Printing,” International Journal of Precision Engineering and Manufacturing, pp. 1–7, 2025.(SCI)

3. L. K. Chang, T. W. Chang, J. C. Huang, D. Q. Liu, M. C. Tsai, and M. H. Horng, “Additive Manufacturing Section Image Features for Magnetic Processing Characteristics Prediction,” Key Engineering Materials, vol. 1016, pp. 99–104, 2025.(SCI)

4. L.-K. Chang, P.-C. Chen, M.-C. Tsai, R.-M. Lee, J.-C. Huang, T.-W. Chang, and M.-H. Horng, “Enhancing prediction of magnetic properties in additive manufacturing products through a 3D convolutional vision transformer model,” The International Journal of Advanced Manufacturing Technology, pp. 1–17, 2025.(SCI)

5. C.-W. Lu, F.-Y. Hung, T.-W. Chang, and H.-Y. Hsieh, “Study and Application on the Electromagnetic Stainless Steel: Microstructure, Tensile Mechanical Behavior, and Magnetic Properties,” Materials, vol. 17, no. 12, p. 2998, 2024.(SCI)

6. P.-H. Liao, M.-C. Tsai, H.-C. Lu, P.-W. Huang, and T.-W. Chang, “Cycloidal Magnetic Gear Utilizing Magnetic Repulsion Characteristics,” IEEE Transactions on Magnetics, 2024.(SCI)

7. T.-W. Chang, P.-W. Huang, H.-H. Yu, C.-C. Huang, C.-C. Mo, and M.-C. Tsai, “Additive Manufacturing for Skew Magnetization Fixture of Annular Magnet,” International Journal of Precision Engineering and Manufacturing, pp. 1–9, 2024.(SCI)

8. T.-W. Chang, P.-W. Huang, H.-H. Yeh, C.-H. Shih, and M.-C. Tsai, “Additive Manufacturing Lightweight Inductor,” pp. 1745–1748.(SCI)

9. T.-W. Chang, P.-W. Huang, C.-H. Shih, A. Hung, C.-C. Wang, H.-F. Ko, and M.-C. Tsai, “Additive manufacturing high current power inductor,” IEEE Transactions on Magnetics, 2024.(SCI)

10. L.-K. Chang, K. Jiang, C. Chung, T.-W. Chang, and M.-C. Tsai, “Integrating machine learning and multi-objective optimization to investigate the magnetic and mechanical properties of FeSiCr soft magnetic composite processed by selective laser melting,” The International Journal of Advanced Manufacturing Technology, vol. 132, no. 7, pp. 3637–3653, 2024.(SCI)

11. L.-K. Chang, R.-S. Chen, M.-C. Tsai, R.-M. Lee, C.-C. Lin, J.-C. Huang, T.-W. Chang, and M.-H. Horng, “Machine learning applied to property prediction of metal additive manufacturing products with textural features extraction,” The International Journal of Advanced Manufacturing Technology, vol. 132, no. 1, pp. 83–98, 2024.(SCI)

12. C.-C. Mo, C.-C. Kuan, Y.-H. Wang, Y.-S. Lu, T.-W. Chang, W.-Y. Liao, T.-H. Fang, M.-C. Tsai, and C.-C. Huang, “Effect of NdCoGa alloy addition to waste wind turbine magnets to enhance the characteristics of recycled sintered NdFeB permanent magnets,” Journal of Magnetism and Magnetic Materials, vol. 578, pp. 170808, 2023.(SCI)

13. T.-Y. Huang, C.-W. Cheng, A.-C. Lee, T.-W. Chang, and M.-C. Tsai, “Influence of wobble-based scanning strategy on surface morphology of laser powder bed-fabricated permalloy,” Materials, vol. 16, no. 5, pp. 2062, 2023.(SCI)

14. P.-W. Huang, T.-W. Chang, W.-H. Yang, Y.-C. Wu, and M.-C. Tsai, “A Novel S-Shape Offset Type of a Modulated Ferromagnetic Pole Piece Design for a Pseudo-Direct Drive Motor,” IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1–5, 2023.(SCI)

15. T.-W. Chang, P.-W. Huang, W.-C. Huang, C.-C. Mo, and M.-C. Tsai, “Additive manufacturing high fault-tolerant axial flux variable reluctance resolver,” IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1–5, 2023.(SCI)

16. K.-S. Yu, C.-W. Cheng, A.-C. Lee, W.-Y. J. Jian, W.-C. Chang, T.-W. Chang, and M.-C. Tsai, “Additive manufacturing of NdFeB magnets by synchronized three-beam laser powder bed fusion,” Optics & Laser Technology, vol. 146, pp. 107604, 2022.(SCI)

17. W.-Y. J. Jian, C.-W. Cheng, W.-C. Chang, T.-Y. Huang, Y.-C. Liang, A.-C. Lee, T.-W. Chang, and M.-C. Tsai, “Fabrication of crack-free Nd-Fe-B magnets with laser powder bed fusion,” Materialia, vol. 21, pp. 101351, 2022.(SCI)

18. H.-Y. Chen, C.-C. Lin, M.-H. Horng, L.-K. Chang, J.-H. Hsu, T.-W. Chang, J.-C. Hung, R.-M. Lee, and M.-C. Tsai, “Deep learning applied to defect detection in powder spreading process of magnetic material additive manufacturing,” Materials, vol. 15, no. 16, pp. 5662, 2022.(SCI)

19. T.-W. Chang, P.-W. Huang, S.-H. Kung, C.-H. Shih, M.-C. Tsai, C. U. Ubadigha, W.-C. Chang, and C.-C. Huang, “Fabrication of non-contact magnetic screws by additive manufacturing,” IEEE Transactions on Magnetics, vol. 58, no. 8, pp. 1–5, 2022.(SCI)

20.T.-W. Chang, K.-W. Liao, C.-C. Lin, M.-C. Tsai, and C.-W. Cheng, “Predicting magnetic characteristics of additive manufactured soft magnetic composites by machine learning,” The International Journal of Advanced Manufacturing Technology, vol. 114, pp. 31777–3184, 2021.(SCI)

21. S.-T. Wu, P.-W. Huang, T.-W. Chang, I.-H. Jiang, and M.-C. Tsai, “Application of magnetic metal 3-D printing on the integration of axial-flow impeller fan motor design,” IEEE Transactions on Magnetics, vol. 57, no. 2, pp. 1–5, 2020.(SCI)

22. K.-J. Jhong, T.-W. Chang, W.-H. Lee, M.-C. Tsai, and I.-H. Jiang, “Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting,” AIP Advances, vol. 9, no. 3, pp. 035317, 2019.(SCI)

23. W.-H. Lee, T.-W. Chang, and Y.-H. Su, “Effects of Annealing Pressure on Microstructure and Conversion Efficiency for Electrodeposited CuInSe₂ Absorbers,” Journal of Nanoscience and Nanotechnology, vol. 17, no. 1, pp. 773–779, 2017.(SCI)

24. C.-S. Chiang, W. Lee, T. Chang, and Y. Su, “Improving conversion efficiency of co-electrodeposited CuInSe₂ thin film solar cells with substrate and solution heating,” Journal of Applied Electrochemistry, vol. 45, pp. 549–556, 2015.(SCI)

25. T.-W. Chang, C.-T. Liu, W.-H. Lee, and Y.-J. Hsiao, “A Study of Back Electrode Stacked With Low Cost Reflective Layers For High-Efficiency Thin-Film Silicon Solar Cell,” Journal of Solar Energy Engineering, vol. 136, no. 3, pp. 031002, 2014.(SCI)

26. T.-W. Chang, W.-H. Lee, Y.-H. Su, and Y.-J. Hsiao, “Effects of photo-assisted electrodeposited on CuInSe₂ thin films,” Nanoscale Research Letters, vol. 9, pp. 1–5, 2014.(SCI)

27. T.-W. Chang, S.-Y. Hu, and W.-H. Lee, “Synthesis of CuInSe₂ thin films from electrodeposited Cu11In9 precursors by two-step annealing,” Journal of Electrochemical Science and Engineering, vol. 4, no. 1, pp. 27–35, 2014.(SCI)

28.T. Chang, Y. Su, and W. Lee, “Improvement on conversion efficiency of CIGS thin film solar cell using electrochemical depleting,” Journal of The Electrochemical Society, vol. 161, no. 12, pp. E167, 2014.(SCI)

29. Y.-H. Su, T.-W. Chang, W.-H. Lee, and B.-H. Tseng, “Characterization of CuInSe₂ thin films grown by photo-assisted electrodeposition,” Thin Solid Films, vol. 535, pp. 343–347, 2013.(SCI)

30. T.-W. Chang, W.-H. Lee, and Y.-H. Su, “Effects of Annealing Pressure for Electrodeposited CuInSe₂ Solar Cell,” ECS Transactions, vol. 50, no. 51, pp. 25, 2013.(SCI)

	計劃名稱
	1. (114年國科會) 馬達科普教育大觀園（二） — 90 萬 2. (114年產學) 薄型馬達設計與磁石整合評估 — 150 萬 3. (113年國科會) 馬達科普教育大觀園 — 100 萬 4. (113年國科會) 研發功率電感器之智慧化設計參數建議模型 — 80 萬 5. (113年產學) 稀土磁石應用設計與整合評估（工研院）— 150 萬 6. (113年產學) 演算法模擬及推演（躍睿東科技）— 60 萬 7. (113年產學) 高導熱銅線用於新型旋轉變壓器特性分析（大亞電線電纜股份有限公司）— 150 萬 8. (112年產學) 永磁馬達稀土磁石性能驗證（工研院）— 50 萬 9. (113年產學) 磁傳導微型發電機線圈與磁石設計及佈局評估（瑋旭智能(股)公司）— 30 萬 10. (111年產學) 一體式電機設計與驅動應用於擾增實境研究（思渥科技）— 30 萬

計劃名稱

1. (114年國科會) 馬達科普教育大觀園（二） — 90 萬

2. (114年產學) 薄型馬達設計與磁石整合評估 — 150 萬

3. (113年國科會) 馬達科普教育大觀園 — 100 萬

4. (113年國科會) 研發功率電感器之智慧化設計參數建議模型 — 80 萬

5. (113年產學) 稀土磁石應用設計與整合評估（工研院）— 150 萬

6. (113年產學) 演算法模擬及推演（躍睿東科技）— 60 萬

7. (113年產學) 高導熱銅線用於新型旋轉變壓器特性分析（大亞電線電纜股份有限公司）— 150 萬

8. (112年產學) 永磁馬達稀土磁石性能驗證（工研院）— 50 萬

9. (113年產學) 磁傳導微型發電機線圈與磁石設計及佈局評估（瑋旭智能(股)公司）— 30 萬

10. (111年產學) 一體式電機設計與驅動應用於擾增實境研究（思渥科技）— 30 萬

	名稱
	1. （國際）TW Chang, Po-Wei Huang, Hsiao-Hung Yu, Ching-Chien Huang, Chih-Chieh Mo, and Mi-Ching Tsai,“Additive Manufacturing for Skew Magnetization Fixture of Annular Magnet” International Conference on Precision Engineering and Sustainable Manufacturing, July 2024, Korea (BEST PAPER AWARD) 2. PW Huang, TW Chang, Hsiao-Hsien Huang, Pin-Hao Liao, I-Hua Jiang, and Mi-Ching Tsai,“Investigation of Axial-Radial Bevel Magnetic Gear based on Magnetic 3D Printing”International Conference on Precision Engineering and Sustainable Manufacturing, July 2024, Korea (Outstanding Presentation Award) 1. （國內研討會）魚孝宏、張宗偉、黃柏維、林秉承、蔡明祺，「以磁性3D列印製作高效能三維充磁座」，2020磁性年會，國立中興大學（佳作）* 2. 孔士豪、張宗偉、蔡明祺，「疊層磁鐵應用於馬達設計之渦流分析」，2019磁性年會，國立屏東大學 3. 陳重佑、鄭中緯、李安謙、蔡明祺、張宗偉，「釹鐵硼硬磁材料之雷射積層製造研究」，第42屆全國力學會議（優等）

名稱

1. （國際）TW Chang, Po-Wei Huang, Hsiao-Hung Yu, Ching-Chien Huang, Chih-Chieh Mo, and Mi-Ching Tsai,“Additive Manufacturing for Skew Magnetization Fixture of Annular Magnet” International Conference on Precision Engineering and Sustainable Manufacturing, July 2024, Korea (BEST PAPER AWARD)

2. PW Huang, TW Chang*, Hsiao-Hsien Huang, Pin-Hao Liao, I-Hua Jiang, and Mi-Ching Tsai,“Investigation of Axial-Radial Bevel Magnetic Gear based on Magnetic 3D Printing”International Conference on Precision Engineering and Sustainable Manufacturing, July 2024, Korea (Outstanding Presentation Award)

1. （國內研討會）魚孝宏、張宗偉、黃柏維、林秉承、蔡明祺，「以磁性3D列印製作高效能三維充磁座」，2020磁性年會，國立中興大學（佳作）

2. 孔士豪、張宗偉、蔡明祺，「疊層磁鐵應用於馬達設計之渦流分析」，2019磁性年會，國立屏東大學

3. 陳重佑、鄭中緯、李安謙、蔡明祺、張宗偉，「釹鐵硼硬磁材料之雷射積層製造研究」，第42屆全國力學會議（優等）

學校名稱	國別	系所	學位	起迄年月

	職位
	1. 強茂股份有限公司材料失效分析資深工程師 2014/03 ~ 2014/12 2. 成功大學馬達科技研究中心博士後研究員 2017/04 ~ 2023/12 3. 成功大學馬達科技研究中心助理研究員 2023/12 ~ 2024/02 4. 成功大學馬達科技研究中心副主任 2024/02 ~ 2025/07

職位

1. 強茂股份有限公司材料失效分析資深工程師 2014/03 ~ 2014/12

2. 成功大學馬達科技研究中心博士後研究員 2017/04 ~ 2023/12

3. 成功大學馬達科技研究中心助理研究員 2023/12 ~ 2024/02

4. 成功大學馬達科技研究中心副主任 2024/02 ~ 2025/07

瀏覽數:

車輛工程系

張宗偉

基本資料表

教師

更多資料